| l |
| l |
| l |
| l |
| l |
| l |
Walkera Drone QR X350 med Kamera, GPS,
GoPro Kamera-holder og farge-Monitor (RTF FPV).
Dette er en super-stabil flygende plattform fra
Walkera, som kan frakte 500 g med ekstra utstyr,
i ca. 15 - 20 min., relativt langt (ca. 1 km), ink. GPS..
Passer til hobby og profesjonelt bruk.
GoPro kamera-holderen leveres
med anti-vibrasjons brakett.
Leveres komplett med alt (RTF) :
6-axis bidirectional Drone med 4-motorer,
farge-Kamera (DV04), sender/mottaker (RC), farge-Monitor
med video opptaker, GPS-mottaker, kompass, Temp,
Spenning, RPM & GPS sensorer, 4Gbyt micro SD-kort,
Fjernkontroll (Se bilde under), Lys, 4 ekstra propeller,
oppladbart Lipo batteri (11.1V/2200mAh) og 230V Lader.
Kan løfte 500 g utstyr, som ekstra kamera, verktøy,
materialer og ekstra eller større batteri,
slik at flytiden kan økes til mer enn 30 minutter.
RTF = Ready To Fly (Inklusiv alt ; Drone QR X350
4 Gbyte SD brikke, RC, Kamera, batteri og 230Vac Lader.
FPV = First Picture View. Se levende bileder på RC'en
Detaljer :
- Innebygget GPS med høydemåler og intelligent fly-kontroll.
- Altitude knapp (Holder fast posisjon i luften).
Legg fra deg RC'en og Dronen stør stille i luften, selv i vind
(På grunn av innebygget GPS, Kompass og Gyroer).
- Hjem knapp (Finner veien hjem selv automatisk)
- Automatisk hjem om RC'en slås av eller utenfor rekevidde.
- Letter og lander automatisk, om du ønsker det.
- 2 typer kamera (Innebygger DV04-kamera og
GoPro- kamera-holder & kabler),
med innebygget Video og still bilde-opptaker. SD-kort.
- Innebygget HD farge-monitor i RC'en
(DEVO-F7 RC. Se under. Best.nr. 0314 ).
DEVO F7 fjernkontrollen (RC) har 8 kanaler (2.4Ghz),
hvor 1 er 5.8GHZ-video,
med innebygget 3,5" HD farge-Monitor (FPV)
( 5.8Ghz-video gir bedre rekevidde enn 2.4GHz-video)
- Rekkevidde : 2.4Ghz radio : Ca. 1000 m.
5.8Ghz Video-bilder : Ca. 800 m.
-Telemetry-funksjon i RC'en
(Se batteri-spenningen i Dronen i 'Real Time', etc.)
- Mål på dronen QR X350 : Diameter : 56 cm.
Høyde : 20 cm.
- Løfteevne : Ca. 500 g
Specification :
1) Length. width. height: 56 x 56 x 20 cm
2) Weight : 1050g
3) Load : 500g
4) Brushless motor : WK-WS-28-008A x 4 pcs.
5) Battery : 11.1V 2200mAh LiPo 25C
( Flytid ca. 15 - 20 min., avhengig av vekt ).
6) Gyro : 6-Axis control system .
7) Radio : DEVO series radio selectable
( 2.4Ghz & 5.8Ghz Video-signal ).
Leveres med Farge monitor bygget inn i RC'en (FPV).
- 6-axis bidirection Drone.
- QR X350 Drone DEVO-7 eller DEVO-F7,
with temperatur sensor.
- GPS & Compass sensor. ..
( FPV = First Picture View. Se video på monitoren)
- RPM sensor.
- 2 Mpixel Camera set
(DV04 Included with Recording-function & 4MB SD-card).
- Monitor (Inside RC-unit)
- Two-way transmission module.
- Camera mount set for GoPro-kamera.
(GoPro kamera-holderen som er justerbar)
- Battery.
- Full set skid landing, med dempe-ledd i hvert ben.
- Charger ( 230Vac ).
Features .
1) Bi-direction transmitting technology,
GPS function applied.
2) Upgrade online Radio and
Bi-direction controller convenient service.
3) 6-axis control technology
makes the super stable flight .
4) Cool flashlight demonstrate unique fascination .
5) Unique scaling ladder simulation skid landing.
Vi levere fullt sett med reserve-deler til QR X350-Dronene.
Walkere Drone QR X350 (RTF) med DV04-kamera,
og opptak-funksjon, GoPro kamera-holder, 4G SD-kort,
RC (DEVO-7; uten farge-Monitor), Oppladbart-batteri,
230Vac Lader, 4 st. ekstra rotor-blader og CD.
( Her følger ikke innebygget farge-Monitor med i RC'en ).
Best.nr. 0313
Pris ...................... .kr. 3.998,-
Walkere Drone QR X350 (RTF) med DV04-kamera og
opptaker-funksjon, GoPro kamera-holder, 4G SD-kort,
RC (DEVO-F7 ; med farge-Monitor og
5,8 Ghz TX/RX video-signal. FPV), Oppladbart-batteri,
230Vac Lader, 4 st. ekstra rotor-blader og CD, etc., etc.
(Her følger innebygget farge-Monitor med i RC'en, etc.).
Best.nr. 0314
Pris ..................... kr. 4.998,-
GoPro Kamera-holder og farge-Monitor (RTF FPV).
Dette er en super-stabil flygende plattform fra
Walkera, som kan frakte 500 g med ekstra utstyr,
i ca. 15 - 20 min., relativt langt (ca. 1 km), ink. GPS..
Passer til hobby og profesjonelt bruk.
GoPro kamera-holderen leveres
med anti-vibrasjons brakett.
Leveres komplett med alt (RTF) :
6-axis bidirectional Drone med 4-motorer,
farge-Kamera (DV04), sender/mottaker (RC), farge-Monitor
med video opptaker, GPS-mottaker, kompass, Temp,
Spenning, RPM & GPS sensorer, 4Gbyt micro SD-kort,
Fjernkontroll (Se bilde under), Lys, 4 ekstra propeller,
oppladbart Lipo batteri (11.1V/2200mAh) og 230V Lader.
Kan løfte 500 g utstyr, som ekstra kamera, verktøy,
materialer og ekstra eller større batteri,
slik at flytiden kan økes til mer enn 30 minutter.
RTF = Ready To Fly (Inklusiv alt ; Drone QR X350
4 Gbyte SD brikke, RC, Kamera, batteri og 230Vac Lader.
FPV = First Picture View. Se levende bileder på RC'en
Detaljer :
- Innebygget GPS med høydemåler og intelligent fly-kontroll.
- Altitude knapp (Holder fast posisjon i luften).
Legg fra deg RC'en og Dronen stør stille i luften, selv i vind
(På grunn av innebygget GPS, Kompass og Gyroer).
- Hjem knapp (Finner veien hjem selv automatisk)
- Automatisk hjem om RC'en slås av eller utenfor rekevidde.
- Letter og lander automatisk, om du ønsker det.
- 2 typer kamera (Innebygger DV04-kamera og
GoPro- kamera-holder & kabler),
med innebygget Video og still bilde-opptaker. SD-kort.
- Innebygget HD farge-monitor i RC'en
(DEVO-F7 RC. Se under. Best.nr. 0314 ).
DEVO F7 fjernkontrollen (RC) har 8 kanaler (2.4Ghz),
hvor 1 er 5.8GHZ-video,
med innebygget 3,5" HD farge-Monitor (FPV)
( 5.8Ghz-video gir bedre rekevidde enn 2.4GHz-video)
- Rekkevidde : 2.4Ghz radio : Ca. 1000 m.
5.8Ghz Video-bilder : Ca. 800 m.
-Telemetry-funksjon i RC'en
(Se batteri-spenningen i Dronen i 'Real Time', etc.)
- Mål på dronen QR X350 : Diameter : 56 cm.
Høyde : 20 cm.
- Løfteevne : Ca. 500 g
Specification :
1) Length. width. height: 56 x 56 x 20 cm
2) Weight : 1050g
3) Load : 500g
4) Brushless motor : WK-WS-28-008A x 4 pcs.
5) Battery : 11.1V 2200mAh LiPo 25C
( Flytid ca. 15 - 20 min., avhengig av vekt ).
6) Gyro : 6-Axis control system .
7) Radio : DEVO series radio selectable
( 2.4Ghz & 5.8Ghz Video-signal ).
Leveres med Farge monitor bygget inn i RC'en (FPV).
- 6-axis bidirection Drone.
- QR X350 Drone DEVO-7 eller DEVO-F7,
with temperatur sensor.
- GPS & Compass sensor. ..
( FPV = First Picture View. Se video på monitoren)
- RPM sensor.
- 2 Mpixel Camera set
(DV04 Included with Recording-function & 4MB SD-card).
- Monitor (Inside RC-unit)
- Two-way transmission module.
- Camera mount set for GoPro-kamera.
(GoPro kamera-holderen som er justerbar)
- Battery.
- Full set skid landing, med dempe-ledd i hvert ben.
- Charger ( 230Vac ).
Features .
1) Bi-direction transmitting technology,
GPS function applied.
2) Upgrade online Radio and
Bi-direction controller convenient service.
3) 6-axis control technology
makes the super stable flight .
4) Cool flashlight demonstrate unique fascination .
5) Unique scaling ladder simulation skid landing.
Vi levere fullt sett med reserve-deler til QR X350-Dronene.
Walkere Drone QR X350 (RTF) med DV04-kamera,
og opptak-funksjon, GoPro kamera-holder, 4G SD-kort,
RC (DEVO-7; uten farge-Monitor), Oppladbart-batteri,
230Vac Lader, 4 st. ekstra rotor-blader og CD.
( Her følger ikke innebygget farge-Monitor med i RC'en ).
Best.nr. 0313
Pris ...................... .kr. 3.998,-
Walkere Drone QR X350 (RTF) med DV04-kamera og
opptaker-funksjon, GoPro kamera-holder, 4G SD-kort,
RC (DEVO-F7 ; med farge-Monitor og
5,8 Ghz TX/RX video-signal. FPV), Oppladbart-batteri,
230Vac Lader, 4 st. ekstra rotor-blader og CD, etc., etc.
(Her følger innebygget farge-Monitor med i RC'en, etc.).
Best.nr. 0314
Pris ..................... kr. 4.998,-
Walkera Drone QR Y100, med Kamera, Kompass,
GPS og 6 aksers-Gyro (RTF & FPV).
Verdens letteste Drone å fly. FPV = First Picture View ( Live Video ).
Kan styres enten med Wifi, fra iPhone, iPad, Android mobil,
Netbrett, eller medfølgende RC (DEVO 4).
RTF = Ready To Fly, klar til å fly ink. alt.
- Flytid : ca. 20 min.
- Fly hjem funksjon (GPS).
- Kan stå stille i luften i faste høyder (6 Gyroer og Kompass).
- Automatisk lande-funksjon.
- Dronen følger etter deg i en gitt avstand.
- Kan styres kun ved å dreie på mobilen (Akelerometer).
- Video og bilder opptak-funksjon.
- Automatisk motor-stopp ved hindringer.
- Styres ved å laste ned iRemote til din mobil fra walkera.com
Motor : 6 st. (HS-852) med rotor-diameter : 11 cm
Drone mål : 23 x 26 x 9 cm.
Vekt ink. batteri : 146 g.
Batteri : 3.7V / 1600mAh Li-Po og 230Vac Adapter.
Vi levere fullt sett med reserve-deler til Dronen QR Y100.
Walkera Drone QR Y100, med Kamera, Kompass,GPS og 6 Gyro.
WiFi versjon, med FPV og video opptak på Mobil eller Netbrettet.
FPV = First Picture View (Se live video på mobilen).
Rekevidde : Ca 100 m
Best.nr. 0337
Pris ................. kr. 1.698,-
Walkera Drone QR Y100, med Kamera, Kompass,GPS og 6 Gyro.
RC (DEVO 4) & WiFi versjon (FPV), med Video-opptak, uten monitor i RC'en.
Rekevidde : Ca 500 m
Best.nr. 0338
Pris .................. kr. 1.899,-
GPS og 6 aksers-Gyro (RTF & FPV).
Verdens letteste Drone å fly. FPV = First Picture View ( Live Video ).
Kan styres enten med Wifi, fra iPhone, iPad, Android mobil,
Netbrett, eller medfølgende RC (DEVO 4).
RTF = Ready To Fly, klar til å fly ink. alt.
- Flytid : ca. 20 min.
- Fly hjem funksjon (GPS).
- Kan stå stille i luften i faste høyder (6 Gyroer og Kompass).
- Automatisk lande-funksjon.
- Dronen følger etter deg i en gitt avstand.
- Kan styres kun ved å dreie på mobilen (Akelerometer).
- Video og bilder opptak-funksjon.
- Automatisk motor-stopp ved hindringer.
- Styres ved å laste ned iRemote til din mobil fra walkera.com
Motor : 6 st. (HS-852) med rotor-diameter : 11 cm
Drone mål : 23 x 26 x 9 cm.
Vekt ink. batteri : 146 g.
Batteri : 3.7V / 1600mAh Li-Po og 230Vac Adapter.
Vi levere fullt sett med reserve-deler til Dronen QR Y100.
Walkera Drone QR Y100, med Kamera, Kompass,GPS og 6 Gyro.
WiFi versjon, med FPV og video opptak på Mobil eller Netbrettet.
FPV = First Picture View (Se live video på mobilen).
Rekevidde : Ca 100 m
Best.nr. 0337
Pris ................. kr. 1.698,-
Walkera Drone QR Y100, med Kamera, Kompass,GPS og 6 Gyro.
RC (DEVO 4) & WiFi versjon (FPV), med Video-opptak, uten monitor i RC'en.
Rekevidde : Ca 500 m
Best.nr. 0338
Pris .................. kr. 1.899,-
| l |
| Walkera Drone QR X350 PRO med iLook Kamera, GPS, G-2D Brushless Gimble og F7 farge-Monitor (RTF & FPV). Dette er en profesjonell super-stabil flygende plattform fra Walkera, som kan frakte 500 g med ekstra utstyr, i 25 - 30 min., relativt langt (ca. 1,5 km), ink. GPS.. Denne Dronen (QR X350 PRO) er en videre-utvikling av (QR X350). Leveres med mange nye forbedringer i forhold til QR X350. Passer til hobby og profesjonelt bruk. Kan plotte 100 view-points. GoPro & iLook kamera-holderen leveres med fjernstyrt anti-vibrasjons brakett (G-2D Gimble). Leveres komplett med alt (RTF & FPV) : - 6-axis bidirectional Drone med 4-motorer, G-2D Gimble, - HD farge-Kamera (iLook), sender/mottaker (F7 RC), farge-Monitor med video opptaker, GPS-mottaker, kompass, Temp, Spenning, RPM & GPS sensorer, F7 Fjernkontroll, Lys, 4 ekstra propeller, oppladbart Lipo batteri (11.1V/5200 mAh) og 230V Lader. - Kan løfte 500 g utstyr, som ekstra kamera, verktøy, materialer og ekstra eller større batteri, slik at flytiden kan økes til mer enn 1 timer. RTF = Ready To Fly (Inklusiv alt ; Drone QR X350 PRO, RC, iLook Kamera, batteri og 230Vac Lader. FPV = First Picture View. Se levende bilder på RC'en. G-2D Gimle ; styrer iLook kamere opp/ned, høyre/venstre fra RC'en. Detaljer : - Innebygget GPS med høydemåler og intelligent fly-kontroll. - Altitude knapp (Holder fast posisjon i luften). Legg fra deg RC'en og Dronen stør stille i luften, selv i vind (På grunn av innebygget GPS, Kompass og Gyroer). - Hjem knapp (Finner veien hjem selv automatisk) - Automatisk hjem om RC'en slås av eller utenfor rekevidde. - Letter og lander automatisk, om du ønsker det. - 2 typer kamera (Innebygger DV04-kamera og GoPro- kamera-holder & kabler), med innebygget Video og still bilde-opptaker. SD-kort. - Innebygget HD farge-monitor i RC'en. DEVO F7 fjernkontrollen (RC) har 8 kanaler (2.4Ghz), hvor 1 er 5.8GHZ-video, med innebygget 3,5" HD farge-Monitor (FPV) ( 5.8Ghz-video gir bedre rekevidde enn 2.4GHz-video) - Rekkevidde : 2.4Ghz radio : Ca. 1500 m. 5.8Ghz Video-bilder : Ca. 1000 m. -Telemetry-funksjon i RC'en (Se batteri-spenningen i Dronen i 'Real Time', etc.) - Mål på dronen QR X350 PRO : Diameter : 56 cm. Høyde : 20 cm. - Løfteevne : Ca. 500 g Specification : 1) Length. width. height: 56 x 56 x 20 cm 2) Weight : 1,3 kg 3) Load : 500g 4) Brushless motor : WK-WS-28-008A x 4 pcs. 5) Battery : 11.1V / 5200mAh LiPo ( Flytid ca. 25 - 30 min., avhengig av vekt ). 6) Gyro : 6-Axis control system . 7) Radio : 2.4Ghz & 5.8Ghz Video-signal. Leveres med Farge monitor innbygget i RC'en (FPV). - 6-axis bidirection Drone. - Drone QR X350 PRO med DEVO-F7 RC, with temperatur sensor. - GPS & Compass sensor. .. ( FPV = First Picture View. Se video på monitoren) - RPM sensor. - 1048p HD Camera set ( iLook Included with Recording-function ). - Monitor (Inside RC-unit) - Two-way transmission module. - Camera mount set for iLook & GoPro-kamera. (Kamera-holderen kan styres fra RC'en ; G-2D Børsteløs Gimble.) - Battery ( 11.1V/5200mAh) - Full set skid landing, med dempe-ledd i hvert ben. - Charger ( 230Vac ). Features . 1) Bi-direction transmitting technology, GPS function applied. 2) Upgrade online Radio and Bi-direction controller convenient service. 3) The newest 6-axis control technology makes the super stable flight . 4) Cool flashlight demonstrate unique fascination . 5) Unique scaling ladder simulation skid landing. Vi levere fullt sett med reserve-deler til QR X350-Dronene. Walkere Drone QR X350 PRO (RTF) med iLook-kamera og opptaker-funksjon, iLook & GoPro fjernstyrt kamera-holder, ny forbedret GPS & processor utgave, super stabil, RC (DEVO-F7 ; med farge-Monitor og 5,8 Ghz TX/RX video-signal. FPV), Oppladbart-batteri (30 min. flytid), 230Vac Lader, 4 st. ekstra rotor-blader og CD, etc., etc. (Her følger innebygget farge-Monitor med i RC'en, etc.). Best.nr. 0336 Pris ..................... kr. 6.998,- |
o
.
o
.
o
.
RC
Wifi & Mobil
| Walkera Drone Tali H500 med iLook+ kamera, GPS, G-3D Brushless Gimble, og F12E RC med stor innebygget farge-Monitor (RTF & FPV). Dette er en profesjonell super-stabil flygende plattform fra Walkera, som kan frakte 1000 g med ekstra utstyr, i 25 - 30 min., relativt langt (ca. 2 km). GoPro & iLook+ kamera-holderen leveres med fjernstyrt anti-vibrasjons brakett (G-3D Gimble). Leveres komplett med alt (RTF & FPV) : - 6-axis bidirectional Drone med 6-motorer, G-3D Gimble, - HD farge-Kamera (iLook+), sender/mottaker (F12E RC), farge-Monitor med video opptaker, GPS-mottaker, kompass, Temp, Spenning, RPM & GPS sensorer, F12E Fjernkontroll, Lys, 6 ekstra propeller, oppladbart Lipo batteri (22.2V/5400 mAh) og 230V Lader. - Kan løfte 800 g utstyr, som ekstra kamera, verktøy, materialer og ekstra eller større batteri, slik at flytiden kan økes til mer enn 1 timer. - G-3D Gimle ; styrer iLook kamere opp/ned, høyre/venstre & 360 grader rotasjon fra RC'en, med anti vibrasjons brakett. RTF = Ready To Fly (Inklusiv alt). FPV = First Picture View. Se levende bilder på RC'en. Detaljer : - Innebygget GPS med høydemåler og intelligent fly-kontroll. - Følg etter meg funksjon. - Altitude knapp (Holder fast posisjon i luften). Legg fra deg RC'en og Dronen stør stille i luften, selv i vind (På grunn av innebygget GPS, Kompass og Gyroer). - Hjem knapp (Finner veien hjem selv automatisk) GPS. - Automatisk hjem om RC'en slås av eller utenfor rekevidde. - Letter og lander automatisk, om du ønsker det. - iLook+ 13 mPixel kamera, med innebygget Video og still bilde-opptaker. - Innebygget stor HD farge-monitor (5") i RC'en. - Rekkevidde : 2.4Ghz radio : Ca. 2 km. 5.8Ghz Video-bilder : Ca. 1,5 km. - Telemetry-funksjon i RC'en (Se batteri-spenningen i Dronen i 'Real Time', etc.) - Batteri : 22.2V / 5400 mAh Lipo (Modul snap in type). - Landings-bena kan slås opp fra RC'en, som gir 360 graders utsyn for kamera. Vi levere fullt sett med reserve-deler til TALI-H500-Dronen. Best.nr. 0339 Pris ..................... kr. 13.998,- |
| Walkera Scout X4 Drone med 8 rotorer, iLook+ kamera, GPS, G-3D Brushless Gimble og følg meg funksjon + mere. Be om spesefikasjonene. Best.nr. 0340 Pris ..................... kr. 12.998,- |
o
.
o
.
o
o
.
.
The MA Drone 3 is a multi-purpose UAV with large and easily configurable
payload bay, that can be folded for easy transportation.
Product Description :
The MA Drone 3 is a multi-purpose UAV with large and easily configurable
payload bay, and can be folded to 1/3rd of its flight size for easy transport.
This Malloy Aeronautics drone is an almost identical 1/3rd scale model of the new
quadcopter design for the full-sized (manned) Hoverbike and was built and test-flown
before we even began work on the full-sized Hoverbike.
It was originally created to test various elements of the new full scale prototype
that we are now building.
Our drone has safety as its central feature.
The ducting around the fans protects people or objects from being damaged by the
spinning blades, and the blades themselves are protected from damage.
This drone is shipped with the latest PixHawk flight controller.
And is tuned, flight tested and ready to fly.
All you need to do is bind this to your favorite radio.
If you do not have one, we can recommend a couple of models we think
are great to start with.
Please see our Drone 3 User Manual for instructions on use and about this product.
This standard “bind-and-fly” 1/3 Hoverbike drone will be delivered with :
•1x Frame
•4x Motors
•4x Propellers
•4x ESC
•2x Battery (2 x 6000mAhr)
•1x Flight Controller (Pixhawk)
•1x Macro Micro board & built in LED lights.
•Fully assembled and flight tested
( Just need to bind to your own radio or by include our recomended radio).
If you have never flown a multicopter before, we highly recommend purchasing
a small drone to practice with first ( The Walkera Y100 Drone is a good start ).
We designed this 1/3rd scale Hoverbike to be safe and robust,
however without RC experience you will be sure to fly your brand new Hoverbike
into the ground on the first day and there are practical limits to how strong
we can make this !
payload bay, that can be folded for easy transportation.
Product Description :
The MA Drone 3 is a multi-purpose UAV with large and easily configurable
payload bay, and can be folded to 1/3rd of its flight size for easy transport.
This Malloy Aeronautics drone is an almost identical 1/3rd scale model of the new
quadcopter design for the full-sized (manned) Hoverbike and was built and test-flown
before we even began work on the full-sized Hoverbike.
It was originally created to test various elements of the new full scale prototype
that we are now building.
Our drone has safety as its central feature.
The ducting around the fans protects people or objects from being damaged by the
spinning blades, and the blades themselves are protected from damage.
This drone is shipped with the latest PixHawk flight controller.
And is tuned, flight tested and ready to fly.
All you need to do is bind this to your favorite radio.
If you do not have one, we can recommend a couple of models we think
are great to start with.
Please see our Drone 3 User Manual for instructions on use and about this product.
This standard “bind-and-fly” 1/3 Hoverbike drone will be delivered with :
•1x Frame
•4x Motors
•4x Propellers
•4x ESC
•2x Battery (2 x 6000mAhr)
•1x Flight Controller (Pixhawk)
•1x Macro Micro board & built in LED lights.
•Fully assembled and flight tested
( Just need to bind to your own radio or by include our recomended radio).
If you have never flown a multicopter before, we highly recommend purchasing
a small drone to practice with first ( The Walkera Y100 Drone is a good start ).
We designed this 1/3rd scale Hoverbike to be safe and robust,
however without RC experience you will be sure to fly your brand new Hoverbike
into the ground on the first day and there are practical limits to how strong
we can make this !
Buster is not just a brave test pilot, he is also a Go-Pro
or Panasonic camera platform !
His head has been designed to hold a Go-Pro camera so that you can film
the scene ahead of you looking through his eyes.
You can see the front rotors and even Busters hands on the controls along
the lower edge of the video, just as if you were seated on the Hoverbike yourself.
This feature allows you to fly the routes on your replica scale model
that you would like to fly one day on your full-sized Hoverbike,
and Buster can capture the action as if it were you flying.
If you ask nicely, Buster may also make himself available for modelling ;
His fine physique lends itself to artists sketching the human form.
We can supply Buster with software for our 3D-Printers.
Then you can print out Buster at home on your personal 3D-Printer.
He is a great role-playing companion for any child with some imagination,
an ideal dress model for toy clothing designers.
He could happily sit on a shelf as decoration, and his camera could double
as a security monitor in home, office, or for parents to monitor a baby in its room
whilst you try in vain to have just one normal dinner with friends downstairs !
or Panasonic camera platform !
His head has been designed to hold a Go-Pro camera so that you can film
the scene ahead of you looking through his eyes.
You can see the front rotors and even Busters hands on the controls along
the lower edge of the video, just as if you were seated on the Hoverbike yourself.
This feature allows you to fly the routes on your replica scale model
that you would like to fly one day on your full-sized Hoverbike,
and Buster can capture the action as if it were you flying.
If you ask nicely, Buster may also make himself available for modelling ;
His fine physique lends itself to artists sketching the human form.
We can supply Buster with software for our 3D-Printers.
Then you can print out Buster at home on your personal 3D-Printer.
He is a great role-playing companion for any child with some imagination,
an ideal dress model for toy clothing designers.
He could happily sit on a shelf as decoration, and his camera could double
as a security monitor in home, office, or for parents to monitor a baby in its room
whilst you try in vain to have just one normal dinner with friends downstairs !
Buster is our affectionately named 1/3rd scale Hoverbike test pilot.
Hight : 56 cm
CAD drawing are available for free so that you may print him
out on your 3D printer.
Click here to view and download Cyborg Buster Files.
Hight : 56 cm
CAD drawing are available for free so that you may print him
out on your 3D printer.
Click here to view and download Cyborg Buster Files.
THE HOVERBIKE
A revolution in aviation :
The Hoverbike is the result of years worth of R&D.
We combined the simplicity of a motorbike and the freedom of a helicopter,
to create the world’s first flying motorcycle.
When compared with a helicopter, the Hoverbike is cheaper,
more rugged and easier to use – and represents a whole new way to fly.
The Hoverbike flies like a quadcopter, and can be flown unmanned or manned,
while being a safe – low level aerial workhorse with low on-going maintenance.
Goal :
The Hoverbike has been designed from the very beginning to replace
conventional helicopters such as the Robinson R22 in everyday one man
operational areas like cattle mustering and survey,
not just for the obvious fact that it is inefficient and dangerous to place complex
conventional helicopters in such harsh working environments but also from a
practical commercial position in which bringing to market a cheaper better
product will not only take over the existing market but can open it up to far more
new customers who before could not afford the upfront costs of a typical helicopter,
and the very expensive and often unlooked for mantainace costs.
Our goal is to produce an extremely reliable helicopter, designed with rugged simplicity
at its heart and true pilot safety built into the design and operation of the aircraft.
Nothing we are doing is new.
We are not developing any component or system that has not been designed,
and thoroughly tested before.
If we are doing anything new it is the combination of existing systems.
We believe that the best step forward is just that – a single step forward.
Nature and commercial history tells us this best.
Our first Hoverbike prototype is a bi-copter.
The vehicle is controlled by deflecting thrust from its two propellers using control vanes –
these are a bit like rudders or ailerons on a plane.
After extensive testing involving the manned vehicle and scale models,
we moved to a proven quadcopter design, because with current technology
we could not design a bi-copter cheap enough for safe and competitive sales.
The bi-copter is an elegant solution and vehicle – however the available technology
is not ready yet for a practical vehicle with a bi-copter design.
The most noticeable feature of the new Hoverbike and the 1/3rd scale drone
is its unique patent pending offset and overlapping rotor blades,
designed to reduce weight and planform area.
Just like the manned vehicle, the ducting around the propellers is a safety feature,
and the vehicle is lightweight and powerful, while folding to a compact size for transportation.
We are in the final construction stages of the latest manned prototype of Hoverbike,
and in a few months we will start flight testing.
After the successful completion of test flights we will build a final engineering prototype
for submission to aviation certification authorities.
This all takes a lot of time and money and raising funds to achieve this is what this
campaign is all about.
We have a proven track record over the years, and our dedication to the Hoverbike
development will continue beyond this kickstarter campaign,
until we are ready for sale of the manned Hoverbike.
History :
The original Hoverbike was built by Chris Malloy of New Zealand,
after work and studies in his garage in suburban Sydney Australia.
This project started out as a hobby, but quickly grew into a commercial enterprise,
with interest from people and groups such as universities, farmers, search and rescue,
private and military, with notable visits from the US Army G-3/5/7,
and Locheed Martin “skunk works”
Most of the frame of the original Hoverbike was hand crafted from carbon fibre,
kevlar and aluminum with a foam core.
Development :
The hoverbike development has been broken up into 3 distinct phases: Design,
Construction and Testing, with further program’s running in parallel such as marketing,
business and aviation certification.
To be expected there is a certain amount of fluidity between these development phases,
with an emphasis on early error and integration detection and correction,
which has already lead to reduced development time and costs.
The hoverbike to date has performed exactly as predicted, a testament to
the basic design of the airframe.
With the first prototype design and construction phases complete and testing begun.
Testing :
Flight testing of the Hoverbike involves 3 steps to achieve production ready flight.
These are described as Development, Engineering and Production.
The development phase includes the initial flight tests of the hoverbike,
which is includes in roughly this order; general airframe testing, tethered hovering,
untethered hovering, translational lifting, spin tests, stall tests etc (some conducted unmanned).
The engineering step is really just data validation, and is not used to expand
the design envelope on the current model.
An example of this is performance testing.
The production step will confirm that the production hoverbike is preforming,
and is built to all characteristics of the design.
A revolution in aviation :
The Hoverbike is the result of years worth of R&D.
We combined the simplicity of a motorbike and the freedom of a helicopter,
to create the world’s first flying motorcycle.
When compared with a helicopter, the Hoverbike is cheaper,
more rugged and easier to use – and represents a whole new way to fly.
The Hoverbike flies like a quadcopter, and can be flown unmanned or manned,
while being a safe – low level aerial workhorse with low on-going maintenance.
Goal :
The Hoverbike has been designed from the very beginning to replace
conventional helicopters such as the Robinson R22 in everyday one man
operational areas like cattle mustering and survey,
not just for the obvious fact that it is inefficient and dangerous to place complex
conventional helicopters in such harsh working environments but also from a
practical commercial position in which bringing to market a cheaper better
product will not only take over the existing market but can open it up to far more
new customers who before could not afford the upfront costs of a typical helicopter,
and the very expensive and often unlooked for mantainace costs.
Our goal is to produce an extremely reliable helicopter, designed with rugged simplicity
at its heart and true pilot safety built into the design and operation of the aircraft.
Nothing we are doing is new.
We are not developing any component or system that has not been designed,
and thoroughly tested before.
If we are doing anything new it is the combination of existing systems.
We believe that the best step forward is just that – a single step forward.
Nature and commercial history tells us this best.
Our first Hoverbike prototype is a bi-copter.
The vehicle is controlled by deflecting thrust from its two propellers using control vanes –
these are a bit like rudders or ailerons on a plane.
After extensive testing involving the manned vehicle and scale models,
we moved to a proven quadcopter design, because with current technology
we could not design a bi-copter cheap enough for safe and competitive sales.
The bi-copter is an elegant solution and vehicle – however the available technology
is not ready yet for a practical vehicle with a bi-copter design.
The most noticeable feature of the new Hoverbike and the 1/3rd scale drone
is its unique patent pending offset and overlapping rotor blades,
designed to reduce weight and planform area.
Just like the manned vehicle, the ducting around the propellers is a safety feature,
and the vehicle is lightweight and powerful, while folding to a compact size for transportation.
We are in the final construction stages of the latest manned prototype of Hoverbike,
and in a few months we will start flight testing.
After the successful completion of test flights we will build a final engineering prototype
for submission to aviation certification authorities.
This all takes a lot of time and money and raising funds to achieve this is what this
campaign is all about.
We have a proven track record over the years, and our dedication to the Hoverbike
development will continue beyond this kickstarter campaign,
until we are ready for sale of the manned Hoverbike.
History :
The original Hoverbike was built by Chris Malloy of New Zealand,
after work and studies in his garage in suburban Sydney Australia.
This project started out as a hobby, but quickly grew into a commercial enterprise,
with interest from people and groups such as universities, farmers, search and rescue,
private and military, with notable visits from the US Army G-3/5/7,
and Locheed Martin “skunk works”
Most of the frame of the original Hoverbike was hand crafted from carbon fibre,
kevlar and aluminum with a foam core.
Development :
The hoverbike development has been broken up into 3 distinct phases: Design,
Construction and Testing, with further program’s running in parallel such as marketing,
business and aviation certification.
To be expected there is a certain amount of fluidity between these development phases,
with an emphasis on early error and integration detection and correction,
which has already lead to reduced development time and costs.
The hoverbike to date has performed exactly as predicted, a testament to
the basic design of the airframe.
With the first prototype design and construction phases complete and testing begun.
Testing :
Flight testing of the Hoverbike involves 3 steps to achieve production ready flight.
These are described as Development, Engineering and Production.
The development phase includes the initial flight tests of the hoverbike,
which is includes in roughly this order; general airframe testing, tethered hovering,
untethered hovering, translational lifting, spin tests, stall tests etc (some conducted unmanned).
The engineering step is really just data validation, and is not used to expand
the design envelope on the current model.
An example of this is performance testing.
The production step will confirm that the production hoverbike is preforming,
and is built to all characteristics of the design.
Drone MA Hoverbike 3 er produsert i England,
1/3 i størrelse av den original Hoverbiken, som du kan fly med selv.
Leveres med lagringsplass oppe og nede.
Vi har eneretten til Dronen og Hoverbiken i Norge (Se under).
Hoverbike MA Drone 3 leveres komplett med alt (RTF) ferdig testet og fløyet,
på fabrikken i England.
Leveres komplett med :
• 1x Frame
• 4x Motors
• 4x Propellers
• 4x ESC
• 2x Lipo Battery (2 x 6Ah/22.2V)
• 1x Flight Controller (Pixhawk)
• 1x Macro Micro board & built in LED lights.
Alternativt også med RC-Radio og 230Vac batteri-lader ( RTF ).
Panasinic eller GoPro kamera kan monteres direkte på dronen (Se bilde),
eller inni hoder på Test-piloten Buster (Se bilder).
Buster kan du lage selv på en av våre 3D-printere og Softwaren leverer vi gratis,
ved kjøp av enten MA Drone 3 eller en av våre 3D-Printere.
Tekniske data MA Drone 3 :
Drone Vekt : 2,2 kg.
Mål : 116 (L) x 59 (B) x 16 (H) cm.
(Sammenlagt : 58(L) x 59 (B) x 32 (H) cm).
Flytid ved 2 x 6Ah/22.2V lipo batterier : 10 - 20 min.
Flytid ved 2 x 12Ah/22.2V lipo batterier : 20 - 35 min.
Flytid ved 2 x 24Ah/22.2V lipo batterier : 35 - 60 min.
Løfte-evne : 7 kg (Max).
Rekevidde : 1 - 3 km (Avhengig av RC).
Hastighet : 20m/s ( 72km/t ).
MA Hoverbike Drone 3 klar til å fly, Uten RC og batteri-Lader.
Best.nr. 0394
kr. 19.998,-
MA Hoverbike Drone 3 klar til bruk, Med RC og batteri-lader (RTF).
(RC'en Spektrum DX6 passer fint til Drone 3).
Best.nr. 0395
kr. 23.998,-
Panasonic 16 Mpixels Kamera
(Se bilder & beskrivelse under).
Best.nr. 0397
kr. 2.998,-
Panasonic 16 Mpixels Kamera med Monitor-armbåndsur, etc.
(Se bilder & beskrivelse under).
Best.nr. 0398
kr. 3.998,-
- Be om priser på ekstra Batterier.
- Be om pris på Bære-veske til Dronen.
- Vi leverer fullt sett med reservedeler og Sender med Monitor (Se under & til høyre).
- Be om gratis Software for å produsere Buster testpiloten,
på en 3D-printer.
1/3 i størrelse av den original Hoverbiken, som du kan fly med selv.
Leveres med lagringsplass oppe og nede.
Vi har eneretten til Dronen og Hoverbiken i Norge (Se under).
Hoverbike MA Drone 3 leveres komplett med alt (RTF) ferdig testet og fløyet,
på fabrikken i England.
Leveres komplett med :
• 1x Frame
• 4x Motors
• 4x Propellers
• 4x ESC
• 2x Lipo Battery (2 x 6Ah/22.2V)
• 1x Flight Controller (Pixhawk)
• 1x Macro Micro board & built in LED lights.
Alternativt også med RC-Radio og 230Vac batteri-lader ( RTF ).
Panasinic eller GoPro kamera kan monteres direkte på dronen (Se bilde),
eller inni hoder på Test-piloten Buster (Se bilder).
Buster kan du lage selv på en av våre 3D-printere og Softwaren leverer vi gratis,
ved kjøp av enten MA Drone 3 eller en av våre 3D-Printere.
Tekniske data MA Drone 3 :
Drone Vekt : 2,2 kg.
Mål : 116 (L) x 59 (B) x 16 (H) cm.
(Sammenlagt : 58(L) x 59 (B) x 32 (H) cm).
Flytid ved 2 x 6Ah/22.2V lipo batterier : 10 - 20 min.
Flytid ved 2 x 12Ah/22.2V lipo batterier : 20 - 35 min.
Flytid ved 2 x 24Ah/22.2V lipo batterier : 35 - 60 min.
Løfte-evne : 7 kg (Max).
Rekevidde : 1 - 3 km (Avhengig av RC).
Hastighet : 20m/s ( 72km/t ).
MA Hoverbike Drone 3 klar til å fly, Uten RC og batteri-Lader.
Best.nr. 0394
kr. 19.998,-
MA Hoverbike Drone 3 klar til bruk, Med RC og batteri-lader (RTF).
(RC'en Spektrum DX6 passer fint til Drone 3).
Best.nr. 0395
kr. 23.998,-
Panasonic 16 Mpixels Kamera
(Se bilder & beskrivelse under).
Best.nr. 0397
kr. 2.998,-
Panasonic 16 Mpixels Kamera med Monitor-armbåndsur, etc.
(Se bilder & beskrivelse under).
Best.nr. 0398
kr. 3.998,-
- Be om priser på ekstra Batterier.
- Be om pris på Bære-veske til Dronen.
- Vi leverer fullt sett med reservedeler og Sender med Monitor (Se under & til høyre).
- Be om gratis Software for å produsere Buster testpiloten,
på en 3D-printer.
Full scale Hoverbike
Komplett FPV løsning for fly, bil og multikopter !
Dette er en CE-godkjent utgave som vil si at frekvenser og sendestyrke er
innenfor grensene for privatbruk i Norge.
Rekkevidden på dette settet i fri sikt er ca 500m.
FPV = First Picture View (Se bilder live på din Monitor).
Senderen skal ha strøm via balanseringskontakt på batteriet, 2-4S XH.
Du kan også bruke en av kablene listet som tilbehør her dersom du ønsker
video fra ditt Panasonic eller GoPro kamera i brillene i stedet for det
medfølgende kameraet.
Vekt på kamera med sender : 49 gram.
Pakken inneholder :
• VGA LCD 25 degree FOV Briller med innebygget 5.8Ghz mottaker.
• Sender 5.8GHz 25mW.
• 600TVL CMOS Vidvinklet kamera.
• 2st. 5G8 2.54 dBi SpiroNET circular polarized antenna.
..with NexwaveRF technology.
• 2s 1000mAh batteri til brillene.
• Ladekabel med 4mm gullkontakt (ikke XT60 overgang slik avbildet).
• Kabel for evnt å videresende bilde fra briller til opptaker, skjerm etc.
• Pusseklut.
• Oppbevaringsbag til brillene.
Best.nr. 0399
kr. 3.398,-
Dette er en CE-godkjent utgave som vil si at frekvenser og sendestyrke er
innenfor grensene for privatbruk i Norge.
Rekkevidden på dette settet i fri sikt er ca 500m.
FPV = First Picture View (Se bilder live på din Monitor).
Senderen skal ha strøm via balanseringskontakt på batteriet, 2-4S XH.
Du kan også bruke en av kablene listet som tilbehør her dersom du ønsker
video fra ditt Panasonic eller GoPro kamera i brillene i stedet for det
medfølgende kameraet.
Vekt på kamera med sender : 49 gram.
Pakken inneholder :
• VGA LCD 25 degree FOV Briller med innebygget 5.8Ghz mottaker.
• Sender 5.8GHz 25mW.
• 600TVL CMOS Vidvinklet kamera.
• 2st. 5G8 2.54 dBi SpiroNET circular polarized antenna.
..with NexwaveRF technology.
• 2s 1000mAh batteri til brillene.
• Ladekabel med 4mm gullkontakt (ikke XT60 overgang slik avbildet).
• Kabel for evnt å videresende bilde fra briller til opptaker, skjerm etc.
• Pusseklut.
• Oppbevaringsbag til brillene.
Best.nr. 0399
kr. 3.398,-
The Eyeshot Panasonic 16 Mpixel Full HD (1080p) Action Camera ;
Waterproof, Shockproof and comes with a host of features,
including an Ambarella A7L Chip (same as GoPro Hero3+),
- Panasonic 16 Megapixels CMOS Sensor
(better than GoPro Hero3+), a 2.4 GHz Waterproof.
- Watch Remote Control (w/ live view record),
- Built In Wi-Fi (free app available on the App Store and Google Play),
and a 60 Meter Waterproof rating.
Awesome Videos Are within Eyeshot with Watch Remote Control.
The Eyeshot Panasonic Full HD Action Camera is a beautiful piece
of technology inside and out, starting with the fact that it is the only
action camera that comes with a watch remote control,
allowing you to see what you are filming while you are filming it.
This quality action camera has a tough, sleek exterior and.
an Ambarella A7L Chip (same as GoPro Hero3+)
running the inner workings like clockwork.
You can count on the Panasonic 16 Mega Pixels CMOS Sensor to produce
even better images than GoPro, too.
Plus it's waterproof up to depths of 60 meters, durable and
comes with a watch remote control, the eyeshot sports action camera even has
built-in Wi-Fi with an app that can be download from either
the App Store or Google Play.
Better Sensor Than GoPro.
According to the popular tech mag Gizmag, "a bigger sensor can gain
more information than a smaller one and produce better images.
" Eyeshot Full HD Action Cameras all come with a Panasonic
16 Mega Pixels CMOS Sensor, which is a better sensor than GoPro's.
A better sensor means more light is used to create the image,
resulting in a better picture.
Panasonic, the well known electronics brand, produces excellent
camera sensors that the makers of Eyeshot could not pass up.
Watch Remote Control - 2.4GHz + Waterproof
Keep your camera's shot within eyeshot with
Eyeshot's watch remote control.
Even if the camera is on your head, on your bike, your car, etc.,
you can see exactly what it sees by using the watch remote control.
Plus it's also runs at speeds up to 2.4 GHz.
Don't settle for less in a Helmet Camera, always know what your camera
is seeing with the Eyeshot Full HD Action Camera.
Ambarella A7L Chip :
The Ambarella A7L is the same chip as used in the GoPro Hero3+,
meaning the Eyeshot Full HD Action Camera has all the consistency
it's better known counterpart is famous for, but trust us when we say
this is the best deal for an Action Camera on the market.
This chip is made to maximize the durability of the system,
enabling you to take this action camera anywhere.
Go skiing, skateboarding, wake boarding, ATV riding or even sky diving.
At a Glance :
Ambarella A7L Chip
Panasonic 16 Mega Pixels CMOS Sensor
Full HD 1080p (60 FPS)
60 Meters waterproof
2.4 GHz waterproof watch remote control (live view recording)
Wi-Fi
Free app on App Store + Google Play
7G+1IRF Ultra-Sharp Lens, F/no=2.8, f=3,4mm
Manufacturer Specifications :
Solution : Ambarella DSP A7LX75m+
Color Sensor : Panasonic 16 Mega Pixels CMOS Sensor
Lens : 7G+1IRF Ultra-Sharp Lens, F/no=2.8, f=3,4mm
Focus Range : 0.8m ~ infinity
Field of View : Ultra Wide/Wide/Narrow (145 Degrees Maximum).
Video Resolution / Field of View: 1080P 1920x1080 (60FPS)
126 Degrees, 1080p (U) 1920x1080 (30FPS) 126 Degrees,
1080p (W) 1920x1080 (30FPS) 102 Degrees, 1080p (N)
1920x1080 (30FPS) 75 Degrees, 960p 1280x960 (60FPS)
140 Degrees, 960p 1280x960 (30FPS) 140 Degrees,
720p 1280x720 (120FPS) 102 Degrees, 720p 1280x720 (60FPS)
126 Degrees, WVGA 848x480 (60FPS) 140 Degrees.
Time lapse : 1,3,5,10,30,60 seconds
Video Format : MP4
Video Encoding : H.264
Picture Resolution / Field of View: 16M 4608x3456 142 Degrees,
12M 4000 x 3000 118 8M 3264x2446 93 Degrees,
5M 2592x1944 73 Degrees.
Burst (Photo/sec) : 7/1
Self-Timer : 2, 10 Seconds.
Interval Shooting : 1, 3, 5, 10, 30, 60 Seconds
Picture Format : JPEG(exif2.2), DCF
White Balance : Auto
Shutter Speed : Still: 1/2 ~ 1/4000 (Electronic Shutter)
Video: 1/30 ~ 1/2000
Shutter Speed : 1min/3min/5min/10min/30min/60min/Off.
Wi-Fi Built-in : IEEE 802.11b/g/n
2.4GHz RF Remote Built-in
Loop Recording : 1080p 30FPS Ultra Wide
High Video Bitrates Capture : H.264 (Up to 15 Mbps)
Average Record Time : Video (1080p, 60FPS):
About 90 Minutes / Photo (16MP) : About 250 Photos
Auto Power Off : 1, 3, 5, 10, 30, 60 Minutes.
HDMI Output
TV Output : HDMI
Waterproof : Up to 60 Meters (With Waterproof Case)
Power Source : Li-ion Battery 1130mAh
Storage : Support micro SD card up to 32GB SDHC Class 6.
PC Interface : USB2.0 (High Speed)
Languages : English
Free Android/IOS App : ActionCam!
Display
Screen Size : 0.83 Inch OLED
Ports
Micro USB
2.5mm External Microphone
Micro SD card
HDMI
Watch
Screen Resolution : 128x96 (12FPS)
Connected Recording Time : 90 Minutes
Standby Time : 6 Hours
Battery : Built In 370 mAh
Dimensions :
Camera Dimensions : 68x55x88mm (L x W x D)
Camerat Weight : 224g
Watch Dimensions : 260x51x17 (L x W x D)
Watch Product Weight : 70g
Product Notes
‘ActionCam!’ is the app that works with this product,
and it is compatible with Android and iOS devices.
Package Contents :
- Sports Camera
- 2.4GHz Waterproof Watch Remote Control.
- Li-ion Battery
- User Manual
- Quick Start Guide
- CD-ROM
- Micro USB Cable
- Charging Cable for Watch
- HDMI Cable
- AC Adapter
- Waterproof Case
- Waterproof Housing Backdoor
- Flat Adhesive Socket
- Curved Adhesive Socket
- Secure Tether
- Velcro Strap
- Swivel T Tip
- Anti-fog Inserts
Panasonic 16 Mpixel vanntett Kamere med trådløs Monitor-Ur.
Best.nr. 0400
Pris kr. 3.998,-
Panasonic 16 Mpixel vanntett kamera.
Best.nr. 0401
Pris kr. 2.998,-
Waterproof, Shockproof and comes with a host of features,
including an Ambarella A7L Chip (same as GoPro Hero3+),
- Panasonic 16 Megapixels CMOS Sensor
(better than GoPro Hero3+), a 2.4 GHz Waterproof.
- Watch Remote Control (w/ live view record),
- Built In Wi-Fi (free app available on the App Store and Google Play),
and a 60 Meter Waterproof rating.
Awesome Videos Are within Eyeshot with Watch Remote Control.
The Eyeshot Panasonic Full HD Action Camera is a beautiful piece
of technology inside and out, starting with the fact that it is the only
action camera that comes with a watch remote control,
allowing you to see what you are filming while you are filming it.
This quality action camera has a tough, sleek exterior and.
an Ambarella A7L Chip (same as GoPro Hero3+)
running the inner workings like clockwork.
You can count on the Panasonic 16 Mega Pixels CMOS Sensor to produce
even better images than GoPro, too.
Plus it's waterproof up to depths of 60 meters, durable and
comes with a watch remote control, the eyeshot sports action camera even has
built-in Wi-Fi with an app that can be download from either
the App Store or Google Play.
Better Sensor Than GoPro.
According to the popular tech mag Gizmag, "a bigger sensor can gain
more information than a smaller one and produce better images.
" Eyeshot Full HD Action Cameras all come with a Panasonic
16 Mega Pixels CMOS Sensor, which is a better sensor than GoPro's.
A better sensor means more light is used to create the image,
resulting in a better picture.
Panasonic, the well known electronics brand, produces excellent
camera sensors that the makers of Eyeshot could not pass up.
Watch Remote Control - 2.4GHz + Waterproof
Keep your camera's shot within eyeshot with
Eyeshot's watch remote control.
Even if the camera is on your head, on your bike, your car, etc.,
you can see exactly what it sees by using the watch remote control.
Plus it's also runs at speeds up to 2.4 GHz.
Don't settle for less in a Helmet Camera, always know what your camera
is seeing with the Eyeshot Full HD Action Camera.
Ambarella A7L Chip :
The Ambarella A7L is the same chip as used in the GoPro Hero3+,
meaning the Eyeshot Full HD Action Camera has all the consistency
it's better known counterpart is famous for, but trust us when we say
this is the best deal for an Action Camera on the market.
This chip is made to maximize the durability of the system,
enabling you to take this action camera anywhere.
Go skiing, skateboarding, wake boarding, ATV riding or even sky diving.
At a Glance :
Ambarella A7L Chip
Panasonic 16 Mega Pixels CMOS Sensor
Full HD 1080p (60 FPS)
60 Meters waterproof
2.4 GHz waterproof watch remote control (live view recording)
Wi-Fi
Free app on App Store + Google Play
7G+1IRF Ultra-Sharp Lens, F/no=2.8, f=3,4mm
Manufacturer Specifications :
Solution : Ambarella DSP A7LX75m+
Color Sensor : Panasonic 16 Mega Pixels CMOS Sensor
Lens : 7G+1IRF Ultra-Sharp Lens, F/no=2.8, f=3,4mm
Focus Range : 0.8m ~ infinity
Field of View : Ultra Wide/Wide/Narrow (145 Degrees Maximum).
Video Resolution / Field of View: 1080P 1920x1080 (60FPS)
126 Degrees, 1080p (U) 1920x1080 (30FPS) 126 Degrees,
1080p (W) 1920x1080 (30FPS) 102 Degrees, 1080p (N)
1920x1080 (30FPS) 75 Degrees, 960p 1280x960 (60FPS)
140 Degrees, 960p 1280x960 (30FPS) 140 Degrees,
720p 1280x720 (120FPS) 102 Degrees, 720p 1280x720 (60FPS)
126 Degrees, WVGA 848x480 (60FPS) 140 Degrees.
Time lapse : 1,3,5,10,30,60 seconds
Video Format : MP4
Video Encoding : H.264
Picture Resolution / Field of View: 16M 4608x3456 142 Degrees,
12M 4000 x 3000 118 8M 3264x2446 93 Degrees,
5M 2592x1944 73 Degrees.
Burst (Photo/sec) : 7/1
Self-Timer : 2, 10 Seconds.
Interval Shooting : 1, 3, 5, 10, 30, 60 Seconds
Picture Format : JPEG(exif2.2), DCF
White Balance : Auto
Shutter Speed : Still: 1/2 ~ 1/4000 (Electronic Shutter)
Video: 1/30 ~ 1/2000
Shutter Speed : 1min/3min/5min/10min/30min/60min/Off.
Wi-Fi Built-in : IEEE 802.11b/g/n
2.4GHz RF Remote Built-in
Loop Recording : 1080p 30FPS Ultra Wide
High Video Bitrates Capture : H.264 (Up to 15 Mbps)
Average Record Time : Video (1080p, 60FPS):
About 90 Minutes / Photo (16MP) : About 250 Photos
Auto Power Off : 1, 3, 5, 10, 30, 60 Minutes.
HDMI Output
TV Output : HDMI
Waterproof : Up to 60 Meters (With Waterproof Case)
Power Source : Li-ion Battery 1130mAh
Storage : Support micro SD card up to 32GB SDHC Class 6.
PC Interface : USB2.0 (High Speed)
Languages : English
Free Android/IOS App : ActionCam!
Display
Screen Size : 0.83 Inch OLED
Ports
Micro USB
2.5mm External Microphone
Micro SD card
HDMI
Watch
Screen Resolution : 128x96 (12FPS)
Connected Recording Time : 90 Minutes
Standby Time : 6 Hours
Battery : Built In 370 mAh
Dimensions :
Camera Dimensions : 68x55x88mm (L x W x D)
Camerat Weight : 224g
Watch Dimensions : 260x51x17 (L x W x D)
Watch Product Weight : 70g
Product Notes
‘ActionCam!’ is the app that works with this product,
and it is compatible with Android and iOS devices.
Package Contents :
- Sports Camera
- 2.4GHz Waterproof Watch Remote Control.
- Li-ion Battery
- User Manual
- Quick Start Guide
- CD-ROM
- Micro USB Cable
- Charging Cable for Watch
- HDMI Cable
- AC Adapter
- Waterproof Case
- Waterproof Housing Backdoor
- Flat Adhesive Socket
- Curved Adhesive Socket
- Secure Tether
- Velcro Strap
- Swivel T Tip
- Anti-fog Inserts
Panasonic 16 Mpixel vanntett Kamere med trådløs Monitor-Ur.
Best.nr. 0400
Pris kr. 3.998,-
Panasonic 16 Mpixel vanntett kamera.
Best.nr. 0401
Pris kr. 2.998,-
| 1 |
Her er eksempel på RC
med innebygget Monitor
som vi kan tilby,
sammen med MA Drone 3
med innebygget Monitor
som vi kan tilby,
sammen med MA Drone 3
Be om pris på RC
med innebygget Monitor,
og Sender/mottaker.
med innebygget Monitor,
og Sender/mottaker.
Be om pris på RC
med innebygget Monitor,
og 5.8Mhz Sender/Mottaker.
Se også lenger nede.
med innebygget Monitor,
og 5.8Mhz Sender/Mottaker.
Se også lenger nede.
o
.
o
.
o
.
o
.
o
.
o
.
o
.
Lengde : 116 cm.
Toppfart : 72 km/t.
Løfteevne : 7 kg (Max).
Toppfart : 72 km/t.
Løfteevne : 7 kg (Max).